Alarm Data Settings; Displaying The Alarm Data List - Sanyo MPX-CD163 Instruction Manual

ALARM DATA SETTINGS

(MAIN MENU)
1 LANGUAGE *
2 CLOCK SET *
3 DISPLAY SET *
4 VCR SET *
5 ALARM SET *
6 SECURITY SET *
7 CONTROL SET *
8 ALARM DATA *
(*:NEXT)
Alarm data can be displayed on the screen in the form of an alarm list. This can be used for purposes such as checking the alarm
images that have been recorded by the recording device.
Note: To display alarm information in the alarm list, you need to make the required ALARM settings (see page 62) and set "ALARM
LIST" to "ON".

Displaying the alarm data list

Press the MENU button.
1
The MAIN MENU screen will be displayed.
MENU
Use the cursor button to select "ALARM DATA" and then press
2
the NEXT button.
NEXT
The ALARM DATA screen will be displayed.
To display the next page of the alarm list, press the NEXT button.
3
The next page of the alarm list will then be displayed.
NEXT
Note: If the number of alarm entries reaches 100, the oldest entries will be
Press the MENU button.
4
MENU
1 2 3 4
(ALARM DATA) 1/ 1
CAM DATE TIME ITEM
1 1 06-08 11:45 E
2 2 06-08 10:30 S
3 3 06-08 08:30 V
(ALARM DATA screen)
deleted and the newer entries will be displayed.
1
Camera number
Shows the camera number where the alarm was
detected.
2
DATE
Shows the date that the alarm was detected.
3
TIME
Shows the time of day that the alarm was detected.
4
ITEM
E: Indicates that an external alarm was detected.
S: Indicates that a motion sensor alarm was detected.
V: Indicates that a video loss was detected.
– 74 –
(MAIN MENU)
1 LANGUAGE ¤
2 CLOCK SET ¤
3 DISPLAY SET ¤
4 VCR SET ¤
5 ALARM SET ¤
6 SECURITY SET ¤
7 CONTROL SET ¤
8 ALARM DATA ¤
(*:NEXT)
(ALARM DATA) 1/ 1
CAM DATE TIME ITEM
1 1 06-08 11:45 E
2 2 06-08 10:30 S
3 3 06-08 08:30 V
(ALARM DATA) 2/ 3
CAM DATE TIME ITEM
9 4 06-08 05:30 E
10 7 06-08 03:00 S
11 10 06-08 02:15 V
English