Sanyo MPX-CD163 Instruction Manual page 55

VCR SET SETTINGS
Use the cursor button to select
4
REC. SPEED (example: 2H), and
– +
press the setting buttons to set the
recording speed.
For a time lapse VCR (TLS): (default setting: 2H)
The recording speed is the recording time when a T-120
tape is being used.
(VCR SET)
RECORDER TLS
2, 12, 24, 48, 72, 96, 120,
REC.SPEED 2 H
ALARM REC.SPEED 2 H
168, 240, 360, 480, 720, 960
SW.IN EDGE ñ
REC.PICTURE 01
PROGRAM REC. OFF
For a real time VCR (REAL): (default setting: 6H)
The recording speed is the recording time when a T-160
tape is being used.
(VCR SET)
RECORDER REAL
6, 18, 30, 48, 72, 96, 120,
REC.SPEED 6 H
ALARM REC.SPEED 6 H
168, 240, 360, 480, 720, 960
SW.IN EDGE ñ
REC.PICTURE 01
PROGRAM REC. OFF
Note: If the recording speed is set to 6, 18 or 30, set the
recording speed for the video device as follows.
Multiplexer recording speed
6 (6 hours)
18 (18 hours)
30 (30 hours)
For a digital video recorder (DVR): (default setting:
0.02 S)
(VCR SET)
RECORDER DVR
0.02, 0.03, 0.05, 0.07,
REC.SPEED 0.02 S
ALARM REC.SPEED 0.02 S 0.10, 0.13, 0.17, 0.20,
SW.IN EDGE ñ
0.23, 0,27, 0.30, 0,33,
REC.PICTURE 01
0.37, 0.43, 0.50, 0.60,
PROGRAM REC. OFF
0.70, 0.80, 0.90, 1, 2, 3,
4, 5, 10, 20, 30 S
Real time VCR recording
speed
8H (8 hours)
24H (24 hours)
40H (40 hours)
– 54 –
Use the cursor button to select
5
ALARM REC. SPEED (example: 2H),
– +
and press the setting buttons to set
the alarm recording speed.
For a time lapse VCR (TLS): (default setting: 2H)
The recording speed is the recording time when a T-160
tape is being used.
(VCR SET)
RECORDER TLS
REC.SPEED 2 H
2, 12, 24, 48H, NC, F2
ALARM REC.SPEED 2 H
SW.IN EDGE ñ
REC.PICTURE 01
PROGRAM REC. OFF
NC: Recording is carried out at the set alarm recording
speed when an alarm is received.
F2: Use this setting when using the SW signal output
connector of a VCR and no switch signal is output for 2 H.
For a real time VCR (REAL): (default setting: 6H)
The recording speed is the recording time when a T-160
tape is being used.
(VCR SET)
RECORDER REAL
REC.SPEED 6 H
6, 18, 30, 48H, NC, F6
ALARM REC.SPEED 6 H
SW.IN EDGE ñ
REC.PICTURE 01
PROGRAM REC. OFF
NC: Recording is carried out at the set alarm recording
speed when an alarm is received.
F6: Use this setting when using the SW signal output
connector of a VCR and no switch signal is output for 6 H.
For a digital video recorder (DVR): (default setting:
0.02 S)
(VCR SET)
RECORDER DVR
0.02, 0.03, 0.05, 0.07,
REC.SPEED 0.02 S
ALARM REC.SPEED 0.02 S 0.10, 0.13, 0.17, 0.20,
SW.IN EDGE ñ
0.23, 0,27, 0.30, 0,33,
REC.PICTURE 01
0.37, 0.43, 0.50, 0.60,
PROGRAM REC. OFF
0.70, 0.80, 0.90, 1, 2, 3,
4, 5, 10, 20, 30 S, NC
NC: Recording is carried out at the set recording speed
even if an alarm is received.
Note: In some cases no signal may be output if the recording
speed is 2H or 6H, even though the recording device has
a SW signal output connector. If this happens, set the
alarm recording speed as follows.
Recording speed
Time lapse VCR
Real time VCR
VCR SET-2
Alarm recording
speed
2H F2
6H F6
VCR SET-2
English