Setup Setting - Sanyo MPX-CD163 Instruction Manual

SECURITY SET SETTINGS
To cancel the locking of all operating buttons
(OPERATION)
Press any single button.
1
A buzzer will sound and the code number
1
request message will appear.
SECURITY CODE ---- SECURITY CODE ---- SECURITY CODE ----
Note: If no action is taken, the code
number request message will
disappear after 10 seconds.

SETUP setting

SECURITY CODE ¤¤¤¤
This lets you set a 4-digit code number to use for locking menu screen settings.
Example: To register code numbers 4, 3, 2, 1
Use the cursor button to select
1
SETUP "CODE 1111", and then
press camera select buttons 4, 3, 2
and 1. SECURITY CODE ----
Note: Make sure that you do not forget the
code number.
4 1
SETUP
CODE
LOCK
SETUP
CODE
SECURITY CODE ¤¤¤¤
LOCK
Use the cursor button to select
2
SETUP "LOCK OFF", use the
setting buttons to select "ON", and
then press the MENU button.
The menu screen settings are now locked.
– +
MENU SETUP
CODE
LOCK
SETUP
CODE
LOCK
English
1111
OFF
4321
OFF
4321
OFF
4321
ON
– 71 –
Use the camera select buttons to
re-enter the code number (example:
1
SECURITY CODE ----
1234) that was entered under
2
OPERATION "CODE".
The buzzer will sound, the lock will be
canceled and the camera images will be
displayed.
SECURITY CODE ¤¤¤¤ SECURITY CODE SECURITY CODE ¤¤¤¤
SECURITY CODE ----
SECURITY CODE ----
SECURITY CODE ----
To cancel the locking of the MENU button
SECURITY CODE ¤¤¤¤
(SET UP)
Press the MENU button.
1
A buzzer will sound and a code number
MENU
SECURITY CODE ¤¤¤¤
request message will appear.
SECURITY CODE ¤¤¤¤
SECURITY CODE ---- SECURITY CODE ---- SECURITY CODE ----
Note: If no action is taken, the code
number request message will
disappear after 10 seconds.
Use the camera select buttons to
2
re-enter the code number (example:
SECURITY CODE ----
1
4321) that was entered under
SECURITY CODE ¤¤¤¤
SETUP "CODE".
The buzzer will sound and the lock will be
canceled.
SECURITY CODE SECURITY CODE ¤¤¤¤ SECURITY CODE ¤¤¤¤
Notes common to SECURITY LOCK:
If both the SETUP lock and the OPERATION lock are applied at the
same time, the code number request message will still appear when
the MENU button is pressed. If you enter the SETUP code number
at this time, both locks will be canceled, but if you enter the
OPERATION code number, only the OPERATION lock will be
canceled, and the SETUP lock will remain applied.
After the locks have been released and operations are enabled, if
you press and hold the LIVE button for three seconds when a
camera image is being viewed, the locking will be applied once more
with the menu in the mode that was set.
During playback, press the VCR button to engage the lock.
¤¤¤¤
¤¤¤¤