Removing The Motor And Adjusting The Brakes; Oil Change; Rsd Oil Types - ABB LME series Operating Instructions Manual

LME / RSD10 / RSD20 / RSD50 / RSD100 (Contrac) ELECTRICAL LINEAR ACTUATOR | OI/LME/RSD10/100-EN REV. E
Removing the motor and adjusting the
brakes
WARNING
Risk of injury!
The actuator position may be changed accidentally by the
repelling power of the valve when the motor is removed or the
brake is released.
• Make sure that process forces are not exerted on the
thrust rod.
In automatic mode, the brake is nearly not exposed to any
mechanical wear, since it is permanently released. Any
readjustment is not necessary. Use the test function of the
configuration software to check the brake.
Change from two to one column
s: 74.20 /Module/++++++++++++Absatzformer 3 pt++++++++++++ @ 94\mod_1461929624184_0.docx @ 891298 @ @ 1

RSD oil types

Ambient temperature
−10 to 65 °C (15 to 150 °F)
−30 to 50 °C (−20 to 130 °F)
−1 to 85 °C (30 to 185 °F)

Oil change

Note
Oils for different temperature ranges may not mixed.
During an oil change, thoroughly remove any oil that may have
escaped to avoid accidents.
Dispose of old oil according to local regulations. Make sure that
the oil does not enter the water cycle. Make sure that any oil
leaking from the device cannot come into contact with hot
components.
Proceed as follows to drain or change the oil:
1. Provide a collecting vessel capable of holding the expected
oil quantity in accordance with Filling volumes on page 34 .
2. Open and release the vent valve, see Mounting position
.
3. Unscrew the lowermost drain plug to drain the oil.
4. Collect the oil in the collection vessel.
5. Make sure all of the oil has been removed from the actuator
housing.
6. Screw the drain plug back in.
7. Refill with the proper volume of oil in accordance with Filling
volumes on page 34 and securely tighten the vent valve.
Default oil filled with delivery
Castrol Alpha BMP 220 – DIN 51517
Mobil SHC 629 – DIN 51517 / ISO 12925-1
Mobil SHC 632 – DIN 51517 / ISO 12925-1
Oil types - DIN 51517
Alternative oil
ESSO Spartan EP 220 – DIN 51517 / ISO 12925-1
BP Energol GR-XP 220 – DIN 51517
Shell Omala 220 – DIN 51517 / ISO 12925-1
Mobilgear 630 – DIN 51517 / ISO 12925-1
33
—
—