Lenovo 20V9003DIX Hardware Maintenance Manual page 82

Figure 86. Remove the LCD module
Go to
https://support.lenovo.com/partslookup
replacement parts:
LCD module
Removable tape
Remove the EDP cable
Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD unit" on page 71
"Remove the hinge cover" on page 73
"Remove the hinge cover (left and right)" on page 73
"Remove the hinge rubbers" on page 74
"Remove the LCD module" on page 74
Step 1. Peel off the tape and then disconnect the EDP cable from the sensor board.
Figure 87. Peel off the tape and then disconnect the EDP cable from the sensor board
Step 2. Remove the EDP cable.
76
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following