Lenovo 20V9003DIX Hardware Maintenance Manual page 81

Figure 83. Peel off the tape and then disconnect cables connected to the LCD module
Step 2. Remove four screws.
Figure 84. Remove four screws
Screw specifications
M2 x L3.5
Step 3. Remove the two pieces of removable tape with tweezers and then turn over the LCD module.
Figure 85. Remove the two pieces of removable tape with tweezers and turn over the LCD module
Step 4. Peel off the tape. Disconnect the EDP cable from the LCD module and then remove the LCD
module.
Number of screws
4
.
Chapter 4 Removing a FRU or CRU
75