Remove The Speakers - Lenovo 20V9003DIX Hardware Maintenance Manual

Figure 68. Remove one screw and then remove the fingerprint board module
Screw specifications
M2 x L3
Step 3. Remove the switch cover.
Figure 69. Remove the switch cover
Step 4. Separate the fingerprint board cable from the fingerprint board.
Figure 70. Separate the fingerprint board cable from the fingerprint board
Go to https://support.lenovo.com/partslookup
replacement parts:
Switch cover
Fingerprint board
Fingerprint board cable

Remove the speakers

Make sure the following FRU (CRU) has been removed.
"Remove the lower case" on page 58
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Disconnect the speaker cable from the system board and release the speaker cable from the cable
guide. Then, remove the speakers.
Number of screws
1
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
67