Remove The Heat Sink - Lenovo 20V9003DIX Hardware Maintenance Manual

Figure 53. Peel off the tape and then remove one screw
Screw specifications
M2 x L3
Step 3. Remove the SSD module by pulling it away from the slot.
Figure 54. Remove the SSD module by pulling it away from the slot
Step 4. Remove one screw and then separate the SSD from the SSD bracket.
Figure 55. Remove one screw and separate the SSD from the SSD bracket
Screw specifications
M2 x L3
Go to
https://support.lenovo.com/partslookup
replacement parts:
SSD
SSD bracket

Remove the heat sink

Make sure the following FRU (or CRU) has been removed.
60
Hardware Maintenance Manual
Number of screws
1
Number of screws
1
to look up the Lenovo part numbers of the following