Figure 32. Remove the system board and the I/O board cable
Step 3.
Separate the I/O board cable from the system board.
Figure 33. Separate the I/O board cable from the system board
Go to
https://support.lenovo.com/partslookup
replacement parts:
System board
I/O board cable
Remove the LCD unit
Make sure the following FRU (CRU) has been removed.
"Remove the lower case" on page 35
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Peel off the pieces of tape.
48
Hardware Maintenance Manual
to look up the Lenovo part numbers of the following