Yamaha Clavinova CVP-10PE Owner's Manual page 21

Record the Bass Lem
6. Press the BASS RECORD and POLY PLAY buttons.
em ons: RECORD Qooroyr PLAY
The RECORD Standby Mode is entered, and the tempo is indicated by
the CLOSED HI-HAT sound.
7. Start playing.
РА 000000000000000000000000000
Qe su
Recording will be started by pressing any key, the Rhythm START
button, or the INTRO/ENDING button.
This results in a two-track multiple recording. You can also play any key
below the key split point.
NOTE: You can play only one BASS note at a time.
8. When you finish playing, press the Rhythm STOP button.
The rhythm and recording will both stop. Recording can also be stopped
by setting the BASS RECORD button to OFF.
1. Press the POLY PLAY and/or BASS PLAY button(s).
Dorr PLAY Qoo: PLAY
2. Press the Rhythm START button.
Playback can also be started either
by pressing the INTRO/ENDING
button or by pressing any key
below the key-split point.
The recorded contents will be
played together with the rhythm.
When playback is finished, it will
stop automatically.
Оз С) знснео START
3. Adjust the volume balance.
Please adjust the volume of each
part played back, using the POLY
VOLUME and BASS VOLUME ` wu х
controls.
мік | MAX
POLY VOLUME
BASS VOLUME
(CVP-10)
[Additional Information]
While recording either part, voice changes may be
desirable. These changes will be played back as
selected, but will not be indicated on the control panel.
During playback, voice changes made manually will
not affect the sounds being reproduced.
(In case you play the keyboard along with playback,
however, the voice used for your performance can be
freely selected and changed.)
When recording, changes in the rhythm pattern and
tempo will also be memorized. And during playback,
the rhythm pattern and tempo can be manually
changed.
Although recording of the SEQUENCER MEMORY
(described later) will not affect the data of PER-
FORMANCE MEMORY, use of ROM MUSIC will
erase any previously memorized PERFORMANCE
MEMORY and SEQUENCER MEMORY data.
When erasure is not desirable, the data can be saved
in a RAM PACK, a RAM MUSIC NOTEBOCK, or
on a Cassette Tape (see Page 18).
Performance Memory data stored in the Clavinova
can be kept for approximately one week, even with
the power OFF.
A combined total of approximately 4,000 notes (for
CVP-8, 2,000 notes) can be recorded in the POLY
and BASS Memories.
To change the recording tempo after recording is
finished, adjust the tempo prior to entering RECORD
Mode, and next set RECORD to ON then to OFF.
It is possible to record to POLY and BASS Memories
at the same time.
When performing simultaneous playback of POLY,
BASS and SEQUENCER MEMORY, the rhythm will
be played back according to the following priority:
PERFORMANCE
MEMORY SEQUENCER
POLY | BAss | MEMORY
RHYTHM Select 2 3 1
VARIATION 2 3 1
INTRO/ENDING | 2 3 1
TEMPO 2 3 1 -
VOLUME 1 2 3 |
FILL IN All memorized FILL IN data is
played back.