Yamaha Clavinova CVP-10PE Owner's Manual page 14

INSTALLATION WS
1.
Refer to your *'Assembly Instructions" manual to ensure
correct assembly. The Clavinova leg assemblies were not
designed to accommodate additional weight.
WARNING: Do not allow your Clavinova or its bench
to rest on or be installed over power cords of any type.
An electrical shock and/or fire hazard could possibly
result from this type of improper installation.
WARNING: Do not place objects on your Clavinova
power cord or place it in a position where anyone could
trip over, walk on or roll anything over it. An improper
installation of this type creates a personal injury/fire
hazard possibility.
Main Power Supply Verification: Your Clavinova has
been manufactured specifically for the main power
supply voltages used in your area. If you should move, or
if any doubt should exist, please consult your Yamaha
Clavinova dealer for instructions.
The main power supply voltage is printed on the name
plate. The name plate of the CVP-10 is on the rear of the
main body; the name plates of the CVP-8 and CVP-6 are
on the back panels.
Environment: Your Clavinova should not be installed
in a position that exposes the cabinet to direct sunlight or
air currents having high humidity or heat levels. This
type of installation can cause contact oxidation, case
joint separation, and cabinet finish problems.
Vinyl Products: Do not set vinyl items, (i.e., head-
phones, vinyl doilies, etc.) on the finished surfaces of
your Clavinova or use a polyvinyl material to cover the
unit for any extended period of time. A chemical re-
action may occur between the finish chemicals and those
contained in the polyvinyl products resulting in a
permanent marring of the finish.
Key Cover (CVP-10): The key cover was not designed
to support decorative items nor to withstand substantial
pressure. Do not permit anyone to sit, lean or climb on
this assembly.
Electromagnetic interference (RFI): Your Clavinova
has been type tested and found to comply with all ap-
plicable regulations. However, if it is installed in the
immediate proximity of other electronic devices, some
form of interference may occur.
t2 Ы
MAINTENANCE ВЕНИ
1. SERVICE: Your Clavinova contains no user ѕегуісе-
able components. Refer all service to qualified service
technicians only.
BENCH STRUCTURAL INTEGRITY (Bench
optional): If any motion or an '"'unsteady'' sensation is
noted in the bench, please check its structual integrity
immediately. Discontinue use until any and all dis-
crepancies are resolved. The bench was designed for
seating only. No other applications are recommended.
3. POWER/PILOT LIGHT: When not in use, always
turn your Clavinova "OFF".
4. CLEANING/CARE
A) GENERAL: DO NOT use chemically harsh (i.e.,
alcohol, paint thinner, etc.) or abrasive cleaners on any
portion of your Clavinova.
B) KEYS/CONTROL PANEL: When cleaning the keys
and control panels of your Clavinova, please use a soft
absorbent-type cloth that has been dampened with a very
mild solution of liquid soap and lukewarm water.
C) CABINET: Clean the cabinet portions of your
Clavinova with a slightly dampened cloth containing a
neutral cleaning agent. The cleaning agent selected
should not contain a high wax content or any other sub-
stance that would have a tendency to form а **build-up"
on the cabinet finish.