Husqvarna DXR 95 Operator's Manual page 137

Fault code number
193
194
195
301
302
304
305
306
307
1101
1102
1103
1104
1105
1106
1109
1110
1401 - 005 - 11.01.2024
Message in the dis-
Cause
play
"Current limitation
The fan motor is blocked.
Function disabled"
"Oil level too High" The hydraulic oil level is too high.
"Grease refill Active" The product fills the grease hose. -
"Oil Temperature
-
Normal"
"Motor Temperature
-
Normal"
"Auto Calibrate
-
Failed"
The track tension can only be
"Track Tension
started when the electric motor is
Failed"
on.
Oil refill is not possible when the
"Oil refill failed"
electric motor is on.
The remote control has fallen
"Remote control Free on the ground. The product will
fall detected" ignore the signals from the joy-
sticks.
The left joystick is not in neutral
"Left joystick X-axis
position when you start the re-
disabled"
mote control.
The left joystick is not in neutral
"Left joystick Y-axis
position when you start the re-
disabled"
mote control.
The side switch on the left joy-
"Left joystick side stick is not in neutral position
rocker disabled" when you start the remote con-
trol.
The right joystick is not in neu-
"Right joystick X-axis
tral position when you start the
disabled"
remote control.
The right joystick is not in neu-
"Right joystick Y-axis
tral position when you start the
disabled"
remote control.
The side switch on the right joy-
"Right joystick side stick is not in neutral position
rocker disabled" when you start the remote con-
trol.
"Left joystick top The left top button on the left joy-
rocker disabled" stick is pushed down.
"Left joystick top The right top button on the left
rocker disabled" joystick is pushed down.
Solution
Do a check of the fan motor and
the grease.
Drain the hydraulic oil to the cor-
rect level.
Accept the warning message on
the display.
Accept the warning message on
the display.
Auto Calibrate again.
Start the motor and start track
tension again.
Stop the electric motor and start
oil refill again.
Accept the warning message on
the display. Make sure that the
remote control is not damaged
before you operate.
Set the left joystick in neutral po-
sition and restart the remote con-
trol.
Set the left joystick in neutral po-
sition and restart the remote con-
trol.
Set the side switch on the left
joystick in neutral position and re-
start the remote control.
Set the right joystick in neutral
position and restart the remote
control.
Set the right joystick in neutral
position and restart the remote
control.
Set the side switch on the right
joystick in neutral position and re-
start the remote control.
Set the left top button on the left
joystick in neutral position and re-
start the remote control.
Set the right top button on the left
joystick in neutral position and re-
start the remote control.
137