Panasonic KX-T336 System Reference Manual page 680

Operation
Recording OGM
10/
1. Press an idle LOOP key.
LOW
- The SRC indicator lights and
dial tone sounds.
(23
L!!zl
2. Dial the feature number for OGM
.s.
7..
Record 791" (default) and the
.
resource number (1 to 4) in
succession.
(Resource number)
1 : OGMl for UCD
2 : OGM2 for UCD
3 : OGM for DISA
4 : OGM for W-UP (Wake-up)
l
The following message appears
on the screen and confirmation
tone sounds.
Message: xxxxxxxx recording: 00 set
I
L UCD-OGMl or
UCD-OGM2 or
DISA-OGM or
Wake Up OGM
3.
Dl
4.
#
Begin your message.
Dial Y#" to conclude recording.
l
Playback starts automatically
through the handset or headset,
the following message appears
on the screen.
Message: xxxxxxxx playing: 00 set
l
After playback finishes, the
SRC indicator remains lit, and
no tone sounds.
(Supplement)
In step 3 if 30 seconds is over, recording is
terminated and playback starts automatically.
Accordingly, it is not necessary to execute step 4
afterward.
In step 3, if you wish to change the message
during recording, you can start recording again by
dialing rt ."
In Step 4, if you wish to interrupt and finish
playback, dial 3."
6-J-20
(40993)
Playing back OGM
ioi
1. Press an idle LOOP key.
LOW
l
The SRC indicator lights and
dial tone sounds.
*1,
EFI
2. Dial the feature number for OGM
4s.
1..
Playback 792" (defautt) and a
.
number below in succession.
. .
(Resource number)
1 : OGMl for UCD
2 : OGM2 for UCD
3 : OGM for DISA
4 : OGM for W-UP (Wake-up)
(*" and DISA No.)
l
l : selectsCard
*2: selectsCard
l
3: setectsCard3
l
4 : selects Card 4
.
The following message
appears on the screen. After
confirmation tone sounds,
playback starts.
1 Message: xxxxxxxx playing: 00 set 1
I
- UCD-OGMl or
UCD-OGM2 or
DISA-OGM or
Wake Up OGM
l
After playback finishes, the
SRC indicator remains lit,
and
no tone sounds.
(Supplement)
In step 2, if you wish to interrupt and finish
playback, press "I#."
During playback you can start playback again
from the beginning by dialing * ."