Tenant Service - Panasonic KX-T336 System Reference Manual

4.00 Tenant Service
Description
A single system can be used as if two systems
were available.
This enables the configuration of two systems
which, in each case, are suited to a different
customer.
(Customer
1)
(Customer 2)
Some of resourcescan be divided up between
the tenants and others are used in common.
A list of resources in each classification is given
below.
[Resources which can be divided up]
l
Trunk Groups
l
Attendant Consoles
l
Extensions
l
Direct inward System Access (DISA)
l
Automatic Gain Control (AGC). _
l
Number of Speed Dialing-System
l
External pagers
l
Doorphones
l
Background Music or Music on Hold
l
Number of Call Park-System parking zones
l
Number of Flexible Absent Messages
l
Number of possible Message Waiting
entrjes
. Passwords (Walking COS, PlTS' zystem
Programming)
[Common resources]
l
Station Message Detail Recording (SMDR)
l
Automatic Route Selection (ARS)
l
Numbering Plan
l
Remote operation control
l
Class of Service (COS)
l
Administration Device
l
Toll restriction tables
To enable Tenant Service, set "System-
Operation' , Tenant Service to "Yes."
"System-Tenanr, programming is used to
determine how the resources will be divided up
between the tenants.
Programming
11
Conditions
The Night Mode can be operated separately
for
each tenant.
Calling to extensions in the other tenant can be
enabled by setting "System-Tenant", Inter-Tenant
Calling to yes."
However, even when this function has been set
to "Yes," it is not possible to call the Attendant
Console in the other tenant.
. .
3-B-7