External Feature Access - Panasonic KX-T336 System Reference Manual

3.00 External Feature Access
.-
-?I
Sending a flash signal through the CO line allows
the extension user to gain access to the features
offered by the host PBX, or to receive CENTREX
service provided by the central office, such as
Call Waiting and so on.
Description
Operation
Gaining access to a feature
(in this case, Call
Waiting)
When a call arrives from another outside party
while in conversation with an outside party,
External Feature Access such as Call Waiting is
effective only in 1 :l conversation with an outside
pafly.
l
You hear call waiting tone.
Programming
1. Press the hookswitch for
approximately one half second
and release.
System Programming
"System-Numbering Plan (3/g)",
External Feature Access
"Group-Trunk Group (l/2)",
Hook Switch flash Time
"Group-Trunk Group (2/2)' ,
Max. Dial
No. after EFA Signa
g-D-6.03 1 O-c-: 0.00
9-E-1 .Ol 10-C-t 4.00
g-E-1.02 1 O-C-? 5.00
. Conditions
External Feature Access is ineffective when
"Group-Trunk Group", Hook Switch Flash hme is
assigned to "None."
The maximum dialing digits to be sent to the CO
line after sending the flash signal are restricted
by "Group-Trunk Group", Max. Dial No. after EFA
Signal.
The longest time limit among the following
assignments determines the time limit between
dialing digits.
.i_
l
"System-System Timer", External First Digit
Time-Out.
l
"System-System Timer", External Interdigit
Time-Out.
l
"System-System Timer", Toll Restriction
Guard Tme-Out.
l
You hear dial tone 1 or 3 or 4.
2. Dial the feature number for
"External Feature Access."
l
The first party is held. Start
conversation with the second
party.
Finishing the conversation with the second party
and starting the conversation with the first party
again
1. Press the hookswitch for
approximately one half second
and release.
l
You hear dial tone 1 or 3 or 4.
2. Dial the feature number for
"External Feature Access."
I
l
Start conversation with the first
party.
5-E-3