Account Code Entry - Panasonic KX-T336 System Reference Manual

2.00 Account Code Entry
Description
Operation
Entering an account code
when calling an
outside party
in the Forced mode
Account Code f?ri ' 5 cwc: !o icewfy incoming
and outgoing CO calls ' 3: account:ng and billing
purposes.
Entry of the code is appended to :he SMDR call
record and can be used later.
The account code can include up to 10 digits.
The validity of the entered account code is not
checked by the system.
Entry of account codes can be forced or optional.
In the forced mode, the account code must be
entered before making an outgoing CO call.
In the option mode, enter the account code, if
necessary.
1. Lift the handset or press the SP-
PHONE button.
l
You hear dial tone1 or 3 or 4.
2. Dial the feature number for
selecting a CO line.
l
You hear dial tone 1.
l
The indicator on the FWD/DND
button flashes.
Programming
I[ 3. Press the FWD/DND button.
l-l = . .
.
You hear dial tone 2.
Conditions
The indicator on the FWD/DND
button lights in red.
If your PITS has a display, it
shows:
Enter ACCNT Code
Only numerical characters "0 to 9" can be
entered as account codes.
4. Dial the account code.
Entering an account code over 10 digits sounds
the alarm tone.
l
Up to 10 digits can be entered
as an account code.
Be sure to enter ' W after dialing a code, since "#"
delimits the code.
•l
5. Dial "#."
#
l
The indicator light on the
FWDIDND button goes out.
l
Youh&rdial tone 1.
6. Dial the telephone number of the
outside party.
4-l-5