Positioning the Turf Compensating Spring and Installing
the Hose Guide
Cutting Unit 4
Cutting unit 1
Cutting unit 2
1. If the hairpin
the compensation-spring rod, remove the
hairpin and insert it in the hole next to the
bracket.
2. Remove the 2 flange locknuts (3/8 inch)
and 2 carriage bolts (3/8 x 1-1/4 inches)
that secure the turf-compensator bracket
the cutting-unit frame.
Setup: Installing the Cutting Units
Cutting unit 3
Cutting unit 4
is installed in the rear hole of
Page 3–3
G410291
Cutting unit 5
Reel motor
G410292
to
G402719
Weight
3464-490 A