Checking the Hydraulic-Fluid Level (continued)
Do not overfill the tank.
Full mark (dipstick)
5. If the level is low, add the appropriate amount of the specified fluid to raise the level to
the full mark.
6. Install the dipstick onto the filler neck.
Inspecting the Hydraulic Lines and Hoses
Inspect the hydraulic lines and hoses for leaks, kinked lines, loose mounting supports, wear,
loose fittings, weather deterioration, and chemical deterioration.
Note:
Maintenance: Hydraulic System Maintenance
Make all necessary repairs before operating.
IMPORTANT
G417019
Add mark (dipstick)
Page 6–33
3464-490 A