Operating Tips (continued)
– Frequently check the rear radiator screen and the air cleaner air inlet screen above
the radiator for chaff build up.
– If the engine overheats, park the machine in a shaded area with good air flow to let
the components cool.
Transporting the Machine
Disengage the PTO and raise the cutting units to the T
driving between objects so you do not accidentally damage the machine or cutting units.
Use extra care when operating the machine on slopes. Drive slowly and avoid sharp turns
on slopes to prevent rollovers. Lower the cutting units when going downhill for steering
control.
Operation: During Operation
RANSPORT
Page 5–24
position. Be careful when
3464-490 A