Product Specification; Safety Instructions - Lumberjack TS254SL Safety And Operating Manual

PRODUCT SPECIFICATION

Table Saw
Motor Power
Table Size
Saw Blade
Cutting Thickness
Blade angle
Max. Ripping Capacity
Blade Speed
Net Weight
USE
This table saw has been designed for cutting wood and plastic materials. You must not cut metal with this
table saw.
The machine cannot be used for works other than for which the machine has been designed and that are
specified in the Operating Instructions.
The manufacturer will not be liable for any consequential damage and injuries if used incorrectly.

SAFETY INSTRUCTIONS

WARNING:
When using the electric tool, basic safety precautions, including the following, should
always be followed to reduce the risk of fire, electric shock and personal injury.
Read all these instructions before operating this product and save the instructions.
GENERAL
Read through the entire operating instructions before putting into operation.
•
•
The operating instructions must always be near the machine. They must be read by every
operator before beginning work and observed conscientiously. Only people who have been trained
in the use of the machine and have been informed of the various dangers may work with the
machine.
•
In addition to the safety requirements contained in these operating instructions and your country's
applicable regulations, you should observe the generally recognised technical rules concerning the
operation of the woodworking machine.
TS254SL
1800W
940x640 mm
254X30X48T
90° 85mm / 45° 65mm
90°~45°
645mm
4100 1/min
22KG