Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lumberjack TS254SE
Summary of Contents for Lumberjack TS254SE
- Page 1 SAFETY AND OPERATING MANUAL TABLE SAW TS254SE ORIGINAL INSTRUCTIONS TS254SE...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Welcome to Lumberjack! Dear customer, Congratulations on your purchase. Before using the Product for the first time please be sure to read these instructions for use. They provide you with all information necessary for using the product safely and to ensure its long service life. -
Page 3: General Power Tool Safety Warnings
A wrench or a key left c) Do not expose power tools to rain or wet attached to a rotating part of the power tool may conditions. Water entering a power tool will result in personal injury. increase the risk of electric shock. TS254SE... - Page 4 Use power tools only with specifically operate the power tool. Power tools are designated battery packs. Use of any other dangerous in the hands of untrained users. battery packs may create a risk of injury or fire. TS254SE...
- Page 5 Always adjust the blade guard in such a materials listed under Intended Use. manner that the face is loosely against the Otherwise, the machine can be subject to work piece when sawing. Never clamp the overload. blade guard when it is open. TS254SE...
- Page 6 The laser This will ensure that the safety of the power light emitted from this device should never be tool is maintained. directed toward any person for any reason. TS254SE...
- Page 7 Any repairs must be carried out by the laser manufacturer or an authorized service agent. 9.11 Do not attempt to repair the laser guide by yourself. 9.12 Do not attempt to change any parts of the laser guide. TS254SE...
-
Page 8: Symbols & Cable Rating Chart
Caution: Laser radiation. Do not Caution! Wear a dust mask. look into the beam! Laser class 2 product! Amperes 7.5M 0 – 2.0 2.1 – 3.4 3.5 - 5.0 5.1 – 7.1 7.1 – 12.0 12.1 – 20.0 TS254SE TS254SE... -
Page 9: Machine Details And Product Features
The capacity of the power tool is designed for sawing hardwood and softwood. The power tool is not suitable for cutting aluminium or other non‐ferrous metals or alloys. TS254SE TS254SE... -
Page 10: Assembly
Certain dust such as oak or beech dust is considered carcinogenic, particularly in combination with wood treatment additives (chromate, wood preservatives). Materials containing asbestos may only be processed by experts. TS254SE... - Page 11 – Position the saw blade protector (6) onto the assistance of a second person and place it on splitting wedge (8) as illustrated and screw its supporting legs. down with the carriage bolts M6 × 50mm, washer and nut (28). TS254SE...
- Page 12 – Screw the cross head screws (29) into the underside of the sawing table. – Screw the knurled screws (30) into the underside of the sawing table. Attaching the Cross Stop – Push the cross stop (4) into the groove (31) of the sawing table. TS254SE...
-
Page 13: Operation
– Tighten the locking handle (15). Adjusting the Angle of the Cross Stop – Loosen the handle (36). – Turn the stop profile (35) to the required angle. The set angle can be read from the scale (37). – Tighten the handle (36). TS254SE... -
Page 14: Working Advice
Do not saw warped/bent work pieces. The work piece must always have a straight edge to face against the parallel guide. Always keep/store the push stick with the power tool. TS254SE... -
Page 15: Maintenance And Service
– Tighten the cross head screws (43) again. Cleaning – For safe and proper working, always keep the power too land its ventilation slots clean. – Remove dust and chips after each working procedure by blowing out with compressed air or with a brush. TS254SE... -
Page 16: Lumberjack Guarantee
1.2.7 The product has not been used for 1.2.3 If asked to do so by lumberjack or hire purposes. its Authorised Dealer, you return the product at your own cost to 1.2.8 The product has been purchased by... - Page 17 2.4 Please note that it is essential that the letter of 2. Claims Procedure claim reaches Lumberjack on the last day of this 2.1 In the first instance please contact the guarantee at the latest. Late claims will not be Authorised Dealer who supplied the product to considered.
-
Page 18: Declaration Of Conformity
TS254SE... -
Page 19: Parts List
PARTS LIST TS254SE... - Page 20 PARTS LIST TS254SE...
- Page 21 PARTS LIST TS254SE...
- Page 22 PARTS LIST TS254SE...
-
Page 23: Parts Diagram
PARTS DIAGRAM PART 1 TS254SE... - Page 24 PARTS DIAGRAM PART 2 TS254SE...
- Page 25 PARTS DIAGRAM FULL TS254SE...
Need help?
Do you have a question about the TS254SE and is the answer not in the manual?
Questions and answers