ABB SACE Emax 2 Instructions Manual page 29

Modules The Modules menu provides various options:
Bluetooth Low Energy -
Connection security
27 | © 2023 ABB | 1SDH001316R1002 - ECN000297030
Parameter Description
The parameter defines the mode in which the parameters are written
in the unit:
• Local , parameter editing only via the display or service connector
• Remote , parameter editing only remotely (Ekip Com modules)
NOTES:
Local/Remote
• the Remote mode requires the presence of auxiliary power
supply and Ekip Com modules, otherwise it disables automatically
• however, the Local/Remote parameter can still be edited in the
Remote mode
The parameter enables communication between the Trip unit and
modules installed via terminal box or outside the unit to be activated.
Correct communication between unit and modules is confirmed by:
Local bus • population of the Modules menu with all the modules connected
• Power Leds of the modules on and synchronized like the power led of
Ekip Touch
• absence of Local Bus alarm in the diagnosis bar
Ekip Signalling
Menu with the parameters of the Ekip Signalling 4K module, if present
4K
Ekip Measuring Menu with the parameters of the module Measurement
- Menu of every module connected and detected
Access to the LOCAL Switch On and RESET signaling functions
Functions
Details of connection Security are available in manual 1SDH0013300R1002.
ABB | SACE Emax 2
Default
Local
Off
Ekip Touch - Settings
1 - Main settings