Advertisement
[2] Arrange the title as required.
Using the TITLE POSITION buttons, move the characters
to the required position.
[3] Press the SCROLL
SPEED
button
to set the scrolling
speed (among 1 to 4 steps).
[4] Press the SCROLL
START/STOP
button
to start title
scrolling.
5] Press the SCROLL
REVERSE
button two or three time
to determine the best scroll start and stops positions.
[6] Press the SCROLL
REVERSE
button to determine the
scrolling direction (either up
" T t " or down ""Y"').
Press the MONITOR SELECT "'PROGRAM" button.
Press the INSERT ON/OFF button to set to the INSERT
OFF mode.
[9] Locate the editing start point on the playback VCR, and
set the VCR to the still mode.
mw How to Add Edges to Characters
Set the recording VCR to the record-pause mode.
[1] Set the playback VCR to the playback mode and set the
recording VCR to the record mode.
When
the scene
at which you want to superimpose the
title is reached, press the INSERT ON/OFF button.
fig] Press the SCROLL START/STOP button to start scrolling
the title.
Press the SCROLL
START/STOP
button
again to stop
scrolling.
fis] Press the INSERT ON/OFF button again to set the IN-
SERT mode OFF.
After
editing
is finished, set the recording
VCR
to the
record-pause mode.
<Example of SCROLL page>
SCROLL
Press twice.
Outline ON (with black edges)
—24—
SCROLL
S
K
1
Press again.
Outline OFF (only white characters)
Advertisement
