Advertisement
The COLOR
LEVEL control allows you to change the colour
intensity of the source picture.
COLOR LEVEL
ON/OFF
Perform the operations in "Before operating" steps [1] — [8] on page 10 to play
back the VCR-1 deck used for playback.
Lighter (weak)
Colour level adjustment:
1) Press the COLOR
LEVEL button so that the indicator lights.
[2] Slide the COLOR
LEVEL control to adjust the colour intensity. Set the DEEP
(uppermost) position for the same intensity as the input signal, or slide toward
LIGHT
LIGHT to get a lighter picture.
Note onuse of COLOR
LEVEL control:
@Even when the COLOR
LEVEL control is set to the LIGHT
position, a completely monochrome (black & white) picture
may not be obtained, depending on the source used.
—-16—
Advertisement
