Advertisement
@ How to Use the EDITING CONTROL Function
< Editing Example >
When using the Editing Control function to play back the playback VCR-1 then VCR-2 while recording the material with the record-
ing VCR.
Recording VCR
Monitor TV
Playback VCR (2)
To IN/OUT
connector
To IN/OUT
connector
To INPUT
Playback VCR (1)
connector
To IN/OUT
To RECOUT
§ +, monitor
connector
connector
OUT
To VCR-2
connector
To VCR-1
connector
< Preparations >
Connect each component as shown above, referring to 'Connections' on page 6 — 9.
[1] Turn on the power of the JX-SV77 and other components.
[6] To stop editing, press the EDITING CONTROL button
again. (The playback VCR will be set to the still mode and
[2] Press the SOURCE
SEELCT 1 button.
the recording VCR will be set to the record-pause mode.)
[3] Locate the editing start point on the playback VCR
(1)
Press the SOURCE
SELECT 2 button.
and set to the still (pause) mode.
Locate the editing start point on the playback VCR
(2)
[4] Set the recording VCR to the record-pause mode.
and set to the still mode.
[5] Press the EDITING CONTROL button on the JX-SV77,
[9] Repeat steps [4] — [6].
(Approx. 16 seconds later, the playback VCR will be set
to the play mode while the recording VCR will be set to
the record mode automatically.)
—~19—
Advertisement
