Advertisement
Applicable VCRs both to recording and playback:
(JVC VCR equipped with REMOTE PAUSE terminal and pre-
roll function as well.)
VCR Pre-Roll function:
Applicable VCRs only for recording:
HR-D430, D370, D330, D230, D227, D190, D180
(JVC VCR equipped with REMOTE
PAUSE terminal.)
Notes on use of EDITING
CONTROL:
®To stop editing, be sure to stop the operation by pressing the
EDITING
CONTROL
button on the JX-SV77. (Do not use
the buttons on the VCRs.) However, when stopping editing
before recording actually starts (within
16 seconds after
pressing the EDITING
CONTROL
button), first press the
stop buttons of the playback and recording VCRs, press the
EDITING CONTROL button so that the indicator goes out,
then perform operations from the beginning.
@lf the input signal is switched over during editing by pressing
the SOURCE
SELECT
buttons, the recording VCR will be
set to the record-pause mode while the playback VCR will
be set to the still play mode. At this time, the picture may be
distorted. For this reason, do not switch input sources during
editing.
Advertisement
