Sharp SW-130HT Instruction Manual page 40

Saw bow swivel lock handle
Manual vise (SW-130HTM)
Pawl
Hydraulic movable vise (SW-130HTSA)
0.5M Roller Table (standard for SW-130HTSA)
4-8
This lock handle is used to lock the saw bow when it is settled
at the designated angle before miter cutting.
Handwheel
Use the vise clamp/open switch to control the hydraulic vise.
This 0.5M roller table supports the work material and ensures the
material is fed in smoothly.
Steps to clamp manual vise:
Step 1 - Lift the pawl and move the movable vise
close to the material.
Step 2 - Put down the pawl.
Step 3 - Turn the handwheel to clamp the vise
tightly.