Table of Contents
Advertisement
Section 9
TROUBLESHOOTING
INTRODUCTION
PRECAUTIONS
GENERAL TROUBLES & SOLUTIONS
MINOR TROUBLES & SOLUTIONS
MOTOR TROUBLES & SOLUTIONS
BLADE TROUBLES & SOLUTIONS
SAWING PROBLEMS & SOLUTIONS
RE-ADJUSTING THE ROLLER TABLE
INTRODUCTION
All the machines manufactured by us pass a 48 hours continuously running test before shipping out
and we are responsible for the after sales service problems during the warranty period if the
machines are used normally. However, there still exist the some unpredictable problems which may
disable the machine from operating.
Generally speaking, the system troubles in this machine model can be classified into three types,
namely GENERAL TROUBLES, MOTOR TROUBLES and BLADE TROUBLES. Although you may have other
troubles which can not be recognized in advance, such as malfunctions due to the limited life-span of
mechanical, electric or hydraulic parts of the machine.
We have accumulated enough experiences and technical data to handle all of the regular system
troubles. Meanwhile, our engineering department had been continuously improving the machines to
prevent all possible troubles.
It is hoped that you will give us your maintenance experience and ideas so that both sides can
achieve the best performance.
9-1
Advertisement
Table of Contents
