Sharp SW-130HT Instruction Manual page 68

OIL RECOMMENDATION FOR MAINTENANCE
Item
Dovetail guide
Roller bearing
Bed roller / surface
Nipples of bearing
Blade tension device
Reducer
Hydraulic system
Inserts
Band wheel Oil with lubricant, but not excess.
Bearing
Cylinder
Wire brush Oil with lubricant, but not excess.
1. Turn off the stop circuit breaker switch before servicing the machine.
2. Then post a sign to inform people that the machine is under maintenance.
3. Drain all of the cutting fluid and oil off and carefully treat them to avoid pollution.
4. The machine must be either LOCKED OUT OR TAGGED OUT while under maintenance.
8-4
Method
Keep grease covered. Antirust.
Sweep clean and oil with lubricant.
Sweep clean and oil with lubricant.
Use grease gun, but not excess.
Use grease gun, but not excess.
Inspect once a week. Change oil of 600 hours of
using. Change it every year.
Inspect half a year. Change oil every year.
Oil with lubricant, but not excess.
Oil with lubricant, but not excess.
Revolution Suggest oil
Daily Shell R2
Daily SEA #10
Daily SEA #10
Monthly Shell R2
Shell Alvania EP
Grease 2,
Monthly
Mobil Mobilplex
48
Omala oil HD220
Regularly
Mobil Gear 630
Shell Tellus 32
Regularly Mobil DTE oil
Light Hydraulic 24
Daily
Weekly
Shell R2
6 Monthly
6 Monthly