Table of Contents
Advertisement
22
TA B L E O F C O N T E N T S
A
A
B
1-2 mm
≔
P R E V I O U S C H A P T E R
0-1 mm
←
→
N E X T C H A P T E R
Insert the AC input conduit
Procedure
1. Remove the conduit enclosure plug (A) from the EVSE.
2. Put the AC input conduit (B) through the inlet hole.
3. Install the AC input conduit.
Insert the AC input cable and install the cold-
pressed terminal for PE
Procedure
1. Strip the PE wire. For the specification, refer to chapter
Technical data, page 32.
2. Insert the PE wire into the cold-pressed terminal to its full
insertion length. Crimp the cold-pressed terminal with
the correct jaws.
3. Finished.
Advertisement
Table of Contents
