Suzuki Jimny 2022 Manual page 313

78RB03018
3) Turn the indicator selector knob (1) left
or right to select "TPMS Mode" and
push the indicator selector knob.
78RB03020
4) Turn the indicator selector knob (1) left
or right to select the initial value and
push the indicator selector knob.
78RB03021
5) When the display shows the message
shown in the above illustration, the set-
ting is completed.
Replacing Tyres and/or Wheels
If you got a flat tyre and replaced it with the
spare tyre, SUZUKI recommends that you
have an authorized SUZUKI dealer or a
qualified workshop mount a new tyre on
the wheel that had the flat tyre. The TPMS
is already set up to recognize the ID code
of the original wheel, and normal TPMS
operation will be restored.
If you need to replace any wheels on your
vehicle, an authorized SUZUKI dealer or a
qualified workshop must check that TPMS
OPERATING YOUR VEHICLE
sensors are installed in the new wheels
and must set up the TPMS to recognize
the new sensors.
WARNING
Use of tyres or wheels not recom-
mended by SUZUKI can result in fail-
ure of the TPMS.
When replacing tyres and wheels,
use only tyres and wheels recom-
mended by SUZUKI as standard or
optional equipment for your vehicle.
Refer to "tyres" in "INSPECTION AND
MAINTENANCE" section for addi-
tional information.
5-112
80TS - 01E