Suzuki Jimny 2022 Manual page 248

OPERATING YOUR VEHICLE
Changing Speed Setting
Setting to the current speed
1) Push "CANCEL" switch (2).
2) Accelerate or decelerate to the desired
speed.
3) Pull down the "RES +/SET –" switch
(3), "SET" indicator (5) appear in the
information display. The current vehicle
speed is set as the maximum speed.
Using "RES +/SET –" switch
To change to a faster speed, press repeat-
edly or hold pulling up the "RES +/SET –"
switch (3).
To change to a slower speed, press
repeatedly or hold pulling down the "RES
+/SET –" switch (3).
5-47
NOTE:
• You can adjust the set speed by 1 km/h
(or 1 mph) by pulling up and down "RES
+/SET –" switch (3) quickly.
• You can adjust the set speed by 5 km/h
(or 5 mph) by pulling up and down and
holding "RES +/SET –" switch (3).
(e.g. 62 Km/h (or 42 mph) > 65 Km/h (or
45 mph) > 70 Km/h (or 50 mph), etc)
• If the current vehicle speed exceeds the
maximum speed when changing to the
slower speed using "RES +/SET –"
switch (3), the speed indication (6) will
flash and the buzzer will sound.
Canceling Speed Limiter
• To cancel the speed limiter, push "CAN-
CEL" switch (2). The set indicator (5) will
disappear.
• To resume the previously set speed, pull
up the "RES +/SET –" switch (3) and
show "SET" indicator (5).
To turn off the speed limiter system, push
"LIMIT" switch (1) and check that limit indi-
cator (4) disappears.
Also, you can turn off the speed limiter by
turning off the engine.
NOTE:
If you turn off the speed limiter system, the
previously set speed in the memory is
cleared. Set your speed again.
80TS - 01E