Suzuki Jimny 2022 Manual page 195

Lane Departure Warning Indicator
Light (if equipped)
81M31080
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this light
comes on briefly so you can check that the
light is working.
When the lane departure warning or vehicle
swaying warning is activated, this light
blinks.
If this light comes on, there is a problem with
the dual camera brake support. Bring the
vehicle to an authorized SUZUKI dealer or
a qualified workshop to have the problem
corrected.
For details, refer to "Dual Camera Brake
Support" in the "BEFORE DRIVING" sec-
tion.
High Beam Assist Warning Light
(orange) (if equipped)
52RM20690
When the engine switch is pressed to
change the ignition mode to ON, this light
comes on by orange briefly so you can
check that the light is working.
For details, refer to "Dual Camera Brake
Support" in "OPERATING YOUR VEHI-
CLE" section.
In the following situations, this light will
come on by orange and the dual camera
brake support will stop functioning when
the ignition mode is ON.
When the stereo camera has failure, the
function of the stereo camera stops until
the engine switch is pressed to change the
ignition mode to LOCK (OFF). Find a safe
place to park and change the ignition mode
to LOCK (OFF) by pressing the engine
switch. Restart the engine, and check that
the dual camera brake support indicator
light and lane departure warning indicator
light go off.
INSTRUMENT CLUSTER
• If both of the indicators stay on after
restarting the engine, there may be a
failure of the stereo camera. Ask an
authorized SUZUKI dealer or a qualified
workshop to have the stereo camera
inspected.
Under the following situations, the function
of the stereo camera stops temporarily.
When the situations are improved, the
temporary stop of the function will be can-
celed.
• When the visibility of the stereo camera
is poor.
• When the temperature of the body of
stereo camera is high.
• When the systems related to the dual
camera brake support stops temporarily.
• When the battery has a voltage abnor-
mality.
NOTE:
If the function of the stereo camera stops
temporarily, high beam assist also stops
temporarily.
80TS - 01E
4-40