Turn Signal Control Lever - Suzuki Jimny 2022 Manual

Turn Signal Control Lever

You can use the turn signal control lever
when the ignition switch is in "ON" position
or the engine switch is in ON mode.
Turn Signal Operation
Turning right
(a)
(1)
(b)
Turning left
55T030350
For Hong Kong and Macao model
Turning left
(a)
(b)
Turning right
80T030230
With the ignition switch in "ON" position or
the ignition mode ON, move the lever
upward or downward to activate the right
or left turn signals.
• Move the turn signal control lever (1) as
follows:
– Turning left: Move the lever upward.
– Turning right: Move the lever down-
ward
• When you move the lever, the turn signal
lights and the turn signal light indicators
on the instrument cluster will flash simul-
taneously.
• When you move the lever to its original
position, the turn signal lights and the
turn signal light indicators on the instru-
ment cluster will be turned off.
• When changing lanes, if you lightly press
the turn signal control lever in the direc-
tions (a) or (b) in which you want to
BEFORE DRIVING
change lanes, the turn signal lights and
turn signal light indicators on the instru-
ment cluster will flash only while the turn
signal control lever is pressed.
• The turn signal control lever in the above
figure is a typical example; the actual
(1)
equipment depends on the vehicle type.
NOTE:
If the angle which you turn the steering
wheel is small, the lever will not automati-
cally returned to its original position. In this
case, return the lever to its original position
by your hand.
3-36
80TS - 01E