Suzuki Jimny 2022 Manual page 198

Table of Contents

Advertisement

INSTRUMENT CLUSTER
Adaptive Cruise Control System
Warning Light (if equipped)
54P000233
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, the light
comes on briefly so you can check that the
light is working. If this light stays on, there
is a problem with the adaptive cruise con-
trol system or stereo camera. When the
stereo camera has failure, the function of
the stereo camera stops until the ignition
switch is turned to "LOCK" position or the
engine switch is pressed to change the
ignition mode to LOCK (OFF). Find a safe
place to park and change the ignition mode
to LOCK (OFF) by pressing the engine
switch. Restart the engine, and check that
the adaptive cruise control system warning
light goes off. If the indicator stays on after
restarting the engine, there may be a fail-
ure of the stereo camera. Ask an autho-
rized SUZUKI dealer or a qualified
workshop to have the stereo camera
inspected.
4-43
4WD Indicator Light
78RB02078
This indicator light comes on when the
transfer gear and the air locking hubs are
switched to 4-wheel drive condition ("4H"
or "4L").
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to ON, this 4WD
indicator light will come on for a while and
then this light will turned on or off accord-
ing to the drive condition.
If 4WD indicator light continues to blink,
there may be a malfunction of the system.
If so, have the system inspected by your
SUZUKI dealer.
When you shift the transfer lever from "2H"
position to "4H" position at a speed of 100
km/h (62 mph) or more, this indicator light
blinks.
When you shift transfer lever again while
changing the drive condition, this indicator
blinks.
NOTE:
When the drive condition is 4-wheel drive
condition and the engine is not running
with the ignition switch turned "ON" or the
ignition mode to ON, this 4WD indicator
light will come on for a while and then
blink. In this situation, when you start the
engine and this indicator light comes on,
the system does not indicate a malfunc-
tion.
80TS - 01E

Advertisement

Table of Contents
loading

Table of Contents