Product Overview; Controls - Toro 74969 Operator's Manual

Product Overview

1. Height-of-cut deck-lift
pedal
2. Transport lock
3. Parking-brake lever

4. Controls

5. Motion-control levers
Controls
Control Panel
Become familiar with all of the controls before you
start the engine and operate the machine
and Figure 5).
1. Blade-control switch
(power takeoff)
2. Horizon display monitor
The Horizon Display Monitor monitors and displays
machine system information.
Figure 4
6. Roll bar
7. Seat belt
8. Fuel cap
9. Mower deck
10. Caster wheel
(Figure 4
Figure 5
3. Audible alarm
4. Key switch
g027333
1. Information screen
2. LED status light
Horizon Display Monitor
Refer to the Software Guide for detailed information
explaining the operator interface that allows users to
access information, reset counters, modify system
settings, and troubleshoot the equipment.
Information Screen
The information screen displays information relative
to machine operation; refer to the Software Guide for
more information.
Buttons
The icons displayed on the information screen above
the buttons indicate the current function. The buttons
allow the user to select the engine speed as well as
navigate through system menus.
Refer to the Software Guide for more information.
LED Status Light
The LED is multi-colored to indicate the system status.
During start-up, the LED illuminates red, then orange,
g230913
then green to verify functionality.
•
Solid green—indicates normal operating activity
•
Blinking red—indicates an active fault
•
Blinking green and orange— indicates that a
clutch reset is required
Refer to the Software Guide for more information.
12
Figure 6
3. Push buttons
g228164