Dimensions Diagrams - Canon varioPRINT 6000 TITAN Series Manual

Canon

3.3 Dimensions Diagrams

The installation site must provide enough space for unrestricted operation,
maintenance work, and proper ventilation. Every attempt should be made to install
the equipment in a room that is large enough for the proper servicing and
maintenance of the equipment, and ensure that issues, such as ventilation, odors,
and dust accumulation are not a concern.
Provide at least 19.7" around the left and right sides of the machine (excluding any external finishing options). Provide
at least 23.6" at the back of the machine, and at least 67" around the front of the machine (with all doors and access
27
panels open).
26 The minimum configuration for the TP TITAN and MICR TITAN machines must include two PrintGuard IV units
(not shown in the illustration).
27 Add an extra 24" (2 feet) if the Videk camera system is installed. The processing unit sits behind the print engine.
Revision 4 varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series Customer Expectations Document
Minimum Configuration
Height Requirements
26
Approx.
42.2"
Approx.
45.3"
Approx.
75.2"
Page 17