Optimum Monthly Product Performance - Canon varioPRINT 6000 TITAN Series Manual

Canon

12. Optimum Monthly Product Performance

The table below describes the differences between the optimum PV (Print Volume)
and maximum PV. Please note that the numbers in the table are for reference
purposes only, and depend strongly on a mostly duplex print environment, the type
of media selected, and environmental conditions. For information on the optimal
environmental conditions for the machine, see
Requirements,"
Monthly PV Type
VP6180
VP6220
Optimum
PV
VP6270
VP6330
VP6180
VP6220
Maximum
PV
VP6270
VP6330
IMPORTANT
If the machine consistently runs at or above the upper end of the optimum PV,
consider purchasing additional machines or higher volume machines.
Revision 4 varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series Customer Expectations Document
on p. 28.
This is the print volume range that the equipment
was intended to run on a regular basis to
maintain a high level of performance and print
quality. Running the equipment within this range
ensures that no undue stress is placed on
components, and it allows time for the proper
servicing and maintenance of the equipment.
This is the maximum number of pages the
machine can produce within a one-month period.
However, sustained use of the machine at this
print level will impact the long term performance
and durability of the machine. It is recommended
to stay within the optimum print volume to
reduce a possible increase in servicing and
maintenance issues.
"Environmental Factors and
Description Number of LTR Prints
300,000 to 2.5 million
500,000 to 5 million
750,000 to 8 million
1 million to 10 million
2.5 million
5 million
8 million
10 million
Page 58