Table of Contents
Advertisement
Canon
6.
Specifications
This chapter explains the specifications of the main unit and optional accessories.
The specifications provided are approximate values for the user's reference only,
and are subject to change without notice for product improvement or future
release.
6.1 Main Unit
Item
Name
Type
Engine Technology
Color Supported
Print Resolution
Number of Gradations
AMPV (Average Monthly
Print Volume)
Non-Printable Area
Maximum Printable
Area for Maximum
Paper Size
Registration Tolerance
Controller
Controller HDD
Capacity
Controller Memory
Security
Network
First Print Time
Warm-Up Time
Sleep Mode Recovery
Time
Operating Noise
Ozone Emissions
35 Based on the printer language and media being used.
Revision 4
varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series Customer Expectations Document
varioPRINT 6000 TITAN Series
LED
Gemini Instant Duplex Technology
Black-and-White
Up to 600 x 1,200 dpi; approximately 180 lpi (lines per inch)
237
Approximately 300,000 to 10,000,000
Up to 2 mm from all four edges of the media
12.5" x 19.1" (318 mm x 486 mm)
Maximum ±0.5 mm front-to-back
PRISMAsync Controller V8.3 or higher
500 GB x 2
8 GB DDR 1333 MHz
E-shredding, HTTPs, Firewall, PIN for Doc Box, User authentication to SDS,
IPv6, Integrity Checker license
Standard Ethernet 10/100/1000 Base-TX
Approximately 16 seconds (from PIM 1, Tray 1 to engine out)
Approximately 11 minutes (from a cold startup at 68°F (20°C)
Approximately 12 minutes
Printing:
Approximately 84 dB
Standby: Approximately 64 dB
Approximately 1 mg/hour
Specifications
35
Page 30
Advertisement
Table of Contents
