Operation; Starting The Trimmer - Toro Flex-Force Power System 60V MAX Manual

Operation

Starting the Trimmer

1. Make sure that the vents on the trimmer are
clear of any dust and debris.
2. Align the cavity in the battery pack with the
tongue on the handle housing
3. Push the battery pack into the handle until the
battery locks into the latch.
4. To start the trimmer, press the lockout button,
then squeeze the run trigger
Note:
Slide the variable-speed switch to
change the speed of the trimmer.
Figure 10
1. Lockout button
2. Variable-speed switch
(Figure 9).
Figure 9
(Figure 10).
3. Run trigger
Shutting Off the Trimmer
To shut off the trimmer, release the trigger.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
Removing the Battery Pack
from the Trimmer
Press the battery latch on the machine to release the
battery pack and slide the battery pack out of the
machine (Figure
g357444
1. Battery latch
g357456
14
11).
Figure 11
g357457