Evaporate Res. Moisture - Miele DGC 7250 Operating And Installation Instructions

Steam combination oven
Hide thumbs Also See for DGC 7250:
Table of Contents

Advertisement

Evaporate res. moisture

When cooking with steam or moisture
injection, residual water can remain in
the steam injection system, e.g. if a
cooking process with moisture injection
is carried out manually or if there is a
power failure.
The next time
Steam cooking
Moisture Plus
  or an Automatic
programme with moisture is used,
Evaporate res. moisture
display.
 It is best to start the evaporation of
residual water straight away so that
only fresh water is used during the
next cooking programme, and so that
the steam injection system does not
overflow when more water is drawn
in.
Danger of injury caused by
steam.
Steam can cause scalding.
Do not open the door while the
residual moisture is being
evaporated.
The time it takes for the residual water
to evaporate varies depending on the
amount of water.
The oven compartment is heated up
and the remaining water is evaporated,
causing condensation to form in the
oven compartment and on the door.
 This condensation needs to be wiped
off the door and the oven
compartment once the oven has
cooled down.
 ,
will appear in the
Cleaning and care
Starting residual moisture
evaporation immediately
Danger of injury caused by
steam.
Steam can cause scalding.
Do not open the door during a burst
of steam.
 Select an oven function or an
Automatic programme that uses the
addition of moisture.
The
Evaporate res. moisture
appear.
 Confirm with OK.
A time will be displayed.
The residual moisture evaporation
process will start. You can follow the
time counting down in the display.
The time shown in the display will
depend on the amount of residual water
left in the system. During the
evaporation process, the duration may
be adjusted by the system according to
the actual amount of water present.
At the end of the residual water
evaporation process, a buzzer will
sound and
Finished
A cooking programme with a function or
an Automatic programme that uses
moisture can now be run.
While the residual water is
evaporating, the moisture will
condense on the door and in the oven
interior. This moisture needs to be
wiped off after the oven has cooled
down.
query will
will appear.
87

Advertisement

Table of Contents
loading

Table of Contents