Miele DGC 7250 Operating And Installation Instructions page 13

Steam combination oven
Hide thumbs Also See for DGC 7250:
Table of Contents

Advertisement

The following applies for stainless steel surfaces:
The coated stainless steel surface can be damaged by adhesives
and will lose its dirt-repelling properties. Do not use sticky notes,
adhesive tape or other types of adhesive on the stainless steel
surface.
Magnets can cause scratches. Do not use the stainless steel
surface as a magnetic notice board.
Cleaning and care
Risk of injury due to electric shock. The steam from a steam
cleaning appliance could reach electrical components and cause a
short circuit. Never use a steam cleaner for cleaning.
Scratches on the door glass can cause the glass to break. Do not
use abrasive cleaners, hard sponges, brushes or sharp metal tools to
clean the door glass.
The shelf runners can be removed (see "Cleaning and care –
Removing the shelf runners with FlexiClip telescopic runners"). Refit
the shelf runners correctly.
The catalytic enamelled back panel can be removed for cleaning
purposes (see "Cleaning and care – Removing the catalytic
enamelled back panel"). Ensure it is correctly fitted after cleaning
and never operate the steam combination oven without the back
panel fitted.
In warm, moist environments, there is a higher probability of
vermin infestations (e.g. cockroaches). Ensure the steam
combination oven and the area surrounding it are always kept clean.
Damage caused by vermin is not covered by the warranty.
Warning and Safety instructions
13

Advertisement

Table of Contents
loading

Table of Contents