Craftsman IB-28140 Owner's Manual page 9

KeyNo.
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Description Quantity
iTEMS NOT iLLUSTRATED
Operating/Safety Instructions 1
MISCELLANEOUS FASTENERS
(installed or bagged)
Spacer 2
#10-32 KEPS Nut 15
#10-32 Flat Washer 3
#8-32 x 1/2-in. Pan-Head Machine Screw (router mounting) 3
#10-16 x 1/2-in. Pan-Head Screw 4
#10-24 x 1/2-in. Pan-Head Machine Screw (router mounting) 3
#10-24 x 1-in. Carriage Bolt 1
#10-32 x 3/8-in. Truss-Head Screw 1
#10-32 x 1/2-in. Pan-Head Machine Screw (router mounting) 3
#10-32 x 5/8-in. Truss-Head Screw 20
#10-32 x 7/8-in. Countersunk-Head Screw 3
5/16-18 x 1/2-in. Pan-Head Machine Screw (router mounting) 3
B3 x 5/8-in. Washer-Head Taj_ Screw 3
#10-32 x 21/2-in.Truss-Head Screw 2
1/4-20 x 11A-in. Carriage Bolt 4
1/4-20 x 11/2-in. Carriage Bolt 4
1/4-20 x 21A-in. Square-Head Bolt 2
1/4-20 x 21/2-in. Carriage Bolt 1
Upper Table Slide (used in miter channel) 1
Lower Table Slide (used in miter channel) 1
NOTE: The hardware bag contains fasteners for mounting several models of routers. Some
fasteners may not be used in the setup of this model. Refer to the parts list above for the
correct sizes and quantities used with this table.
Miscellaneous Fasteners
(29) Spacer
(for Square-Head Bolts)
@®
(30) #10-32 KEPS Nut
(for Switch Box)
©
(31) #10-32 Flat Washer
(for Miter Gauge)
(32) #8-32 x 1/2-in. (33) #10-16 x 1/2-in.
Pan-Head Machine Pan-Head Tapping Screw
Screw (for Router) (for Leg Caps)
(34) #10-24 x 1/2-in.
Pan-Head Machine
Screw (for Router)
(35) #10-24 x 1-in.
Carriage Bolt
(for Miter Gauge)