Craftsman IB-28140 Owner's Manual page 7

Refer to Parts List below and on pages 8-10.
" IAWARNINGI If ANY ofthe parts are
i_l i missing, DO NOT attempt
to assemble, install, or use your router table
until the missing parts have been found or
replaced and your router table has been
properly and correctly assembled per this
manual.
, For missing parts or technical assistance,
call 1-800-624-0488.
, In order to simplify handling and to minimize
any damage that may occur during shipping,
your router table comes mostly assembled.
Repositioning of some parts will be required.
, Separate all parts from the packaging
materials and check each part against the
illustrations and the parts lists to make sure
that all parts have been included. Do this
before discarding any of the packaging
material.
Key No. Description Quantity
A ROUTER TABLE ASSEMBLY COMPONENTS
preassembled__
Router Tabletop, 1 in. 1
Insert Plate 1
Miter Channel (includes 3-#10-32 x 7/8-in. screws, item 41 ) 1
Quick-Clamp Router Mounting Plate 1
Router Release Mechanism (net shown) 1
Front Table Housinq 1
Rear Table Housing 1
Left Folding Steel Legs 2
Tool Box w/Hinged Cover 2
Right Folding Steel Legs 2
Insert Ring Set (3 rings per set) 1
Insert Ring w/1-in, dia. hole 1
Insert Ring w/2-in, dia. hole 1
Insert Ring w/2¾-in, dia. hole 1
Fence Retaining Bracket (not shown) 2
Small Star Clamping Knob (not shown) 2
SWITCH BOX ASSEMBLY COMPONENTS
Switch Box Assembly (with lockout key)) 1
Lockout Key 1
FENCE ASSEMBLY COMPONENTS
(s hij?j_d preassembled)_
16 Router Table Fence 1
17 Featherboard Mounting Rail 1
18 Overhead Guard Assembly (includes spacer) 1
19 Faceplate 2
20 Outfeed Shim Plate (may be attached to eutfeed side of fence) 2
21 Clamping Knob 11
1
2
3
4
5
6
7
8
9
10
11
11A
11B
11C
12
13
B
14
15
C
22 Featherboard
- Spacer (see item 31)
D MITER GAUGE ASSEMBLY COMPONENTS
23 Miter Bar
24 Protractor Head
- Flat Washer (see item 33)
25 Small Clamping Knob
E STARTER PIN COMPONENTS
26 Starter Pin
27 Starter Pin Guard
- Guard Screw (see item 38)
2
2
1
1
1
1
1
1
1