Craftsman IB-28140 Owner's Manual page 15

INSTALLING THE QUICK-CLAMP
MOUNTING PLATE AND ROUTER TO
THE ROUTER TABLE (Figs. 8=11)
I A WARNING I Before using the router
I"t"1
table, verify that the router
is securely clamped in the router table
base. While working, periodically check the
router base fasteners clamping tightness.
Router motor vibration can loosen fasteners
during use, causing the router to fall from the
table.
1. Make sure the table (A) is upright and on its
legs (8 and 10). (See Fig. 8.)
2. Check the clamp handle to make sure it is
open and released. (See Fig. 9.)
3. Position the router mounting plate (4) on
the router so the angled tabs on the
mounting plate are facing down and
towards the router. (See Fig. 10.)
4. While supporting the router, slide the two
angled tabs on the mounting plate into the
left tabs on the base plate. Rotate the
router and the mounting plate up until the
mounting plate is flush against the base
plate; then secure the mounting plate by
pushing the clamp handle towards the
router. The latch spring will snap in place
to lock when the clamp handle is locked.
(See Fig. 11 and Detail 11.)
NOTE: Mounting plate must be mounted so no
router parts interfere with the table or the router
mounting mechanism.
Fig. 8
Fig. 9
OPENED
CLAMP
HANDLE
Fig. 11
INSERT
TABS
Detail 11
LATCH
SPRING
CLOSED
CLAMP
HANDLE
PUSHCLAMP
ROTATE HANDLE TOWARDS
ROUTER UP ROUTER
15