I NSTR UM ENT TAB LE
6.7.2
To edit a slave device, click Edit Slave IDs button and enter the new ID number in the field
next to each device. When finished, click OK button to save the changes, or click Cancel but-
ton to discard changes.
6.7.3
Export Device Configuration
The gateway provides an option, Download to PC, to export the existing configured devices
configuration in XML format.
Import Device Configuration
The gateway provides an option to import new configuration, Upload, for connected devices
in XML format. Once the import file is uploaded, the gateway downloads the new configura-
tion to the connected devices. This option simplifies and automates devices configuration.
The details of the XML format are provided in
6.8
Instrument Table
Click Configuration > WirelessHART > Instruments in the left navigation column to view the
number of devices in the WirelessHART network.
This page has similar information as shown in Devices page. However, it has information
about the burst commands cached in the gateway.
40
Edit Slave Device
It may take a few seconds for the new ID numbers to take effect.
Device Configuration
ABB's AWIN WirelessHART Gateways Configurator (3BNP102928) can be used to
import, edit and export device configuration. For further details, refer to Bulk
Configuration Guide (4JNO000307).
Figure 16: Instruments table screen
Appendix.
CO NF IG URATI ON
3B NP 10299 2 B