Figure 19 Mnavigate Fieldbus Slave Address Parameterization For Primary And Backup Digital Gateway - ABB LVS Digital Manual

R EDU NDA N CY
•
•
Set the slave address for the selected Fieldbus / Field network interface.
2.
Figure 19 MNavigate Fieldbus Slave address Parameterization for Primary and Backup Digital
Gateway
1 TG C90 80 04
It is essential that the IP address setting for LAN 2 of Primary and Backup Digi-
tal Gateway is different (e.g. Primary = 192.168.200.100 / Backup =
192.168.200.101).
The same subnet mask is used because both Ethernet ports are connected to
the same Ethernet network for MView and MNavigate communication.
R EDU NDA NCY CONFIG UR AT IO N
27