Wiring Cover - Mitsubishi Electric FR-E720-600 Instruction Manual

Removal and reinstallation of the cover
Reinstallation
1) Match the front cover 2 to the inverter front and install it straight.
2) Insert the two fixed hooks on the left side of the front cover 1 into the sockets of the inverter.
3)Tighten the screw of the front cover 1.
1)
Front cover 2
NOTE
Fully make sure that the front cover has been reinstalled securely.
The same serial number is printed on the capacity plate of the front cover and the rating plate of the inverter. Since
these plates have the same serial numbers, always reinstall the removed cover onto the original inverter.
1.3.2

Wiring cover

Removal and reinstallation
The cover can be removed easily by pulling it toward you. To reinstall, fit the cover to the inverter along the guides.
FR-E720-008 to 050
Example of FR-E720-050
6
2)
Front cover 1
FR-E720-080 to 175
FR-E740-016 to 170
Guide
Wiring cover
Example of FR-E740-095
3)
Tighten
the installation
screws
Fixed hook
FR-E720-240 to 600
Guide
Wiring cover
Example of FR-E720-240
Socket of the inverter
Guide
Wiring cover