Mitsubishi Electric FR-E720-600 Instruction Manual page 100

Frequency setting by external terminals
(2) Jog operation from PU
Selects JOG operation mode from the operation panel and PU (FR-PU04/FR-PU07). Operation is performed only while
the start button is pressed.
Operation
1.
Confirmation of the RUN indication and
operation mode indication
The monitor mode should have been
selected.
The inverter should be at a stop.
2.
Press to choose the PU JOG operation
mode.
3.
Press .
While is pressed, the motor rotates.
The motor runs at 5Hz. (Pr. 15 initial value)
4.
Release
[When changing the frequency of PU JOG operation]
5.
Press to choose the parameter setting
mode.
6.
Turn until Pr. 15 JOG frequency appears.
7.
Press to show the currently set value.
(5Hz)
8.
Turn to set the value to "
(10Hz)
9.
Press to set.
10.
Perform the operations in steps 1 to 4.
The motor rotates at 10Hz.
98
R/L1
Three-phase AC
S/L2
power supply
T/L3
Operation panel
Hold down.
Release
".
Flicker...Parameter setting complete!!
Inverter
U
V
Motor
W
PRM indication is lit.
(The parameter number read previously
appears.)
Display
Stop