System Setup; Switching The Camera Video Output On/Off; Camera Settings Menu - Canon RC-IP100 User Manual

System Setup

Switching the Camera Video Output On/Off

Toggles the video output of the camera between on and off. For
some cameras, it is used to switch the camera between the
power-on and standby states.
Setting the video outputs of all cameras on/off
1 Display the home screen.
If the home screen does not appear, tap the [HOME] button
on the screen.
2 Tap the [SETTINGS] button.
The SETTINGS screen appears.
3 Tap the [Video] button.
4 Tap the [ALL CAMERAS] button.
5 Tap the [ON] or [OFF] button.
0 Tapping the button changes the button color.
0 Tap the [ON] button to set the video output of the camera
to on.
Tap the [OFF] button to set the video output of the camera
to off.
6 Tap the [ENTER] button to confirm the setting.
Setting the video outputs of camera groups on/
off
1 Display the home screen.
If the home screen does not appear, tap the [HOME] button
on the screen.
2 Tap the [SETTINGS] button.
The SETTINGS screen appears.
3 Tap the [Video] button.
4 Tap the [CAMERA Group] button.
5 Tap the number button corresponding to the
number of the camera group to be configured.
0 Multiple camera groups can be selected.
0 The digit of the number with non-existent camera within
the camera group is displayed in white.
6 Tap the [ON] or [OFF] button.
0 Tapping the button changes the button color.
0 Tap the [ON] button to set the video output of the camera
to on.
Tap the [OFF] button to set the video output of the camera
to off.
7 Tap the [ENTER] button to confirm the setting.
Setting the video output of individual camera
on/off
1 Display the home screen.
If the home screen does not appear, tap the [HOME] button
on the screen.
2 Tap the [SETTINGS] button.
The SETTINGS screen appears.
3 Tap the [Video] button.
4 Tap the [Single] button.
5 Tap the number button corresponding to the
number of the camera group to be configured.
The digit of the number with non-existent camera within the
camera group is displayed in white.
6 Tap the number button corresponding to the
number of the camera to be configured.
0 Multiple cameras within the same group can be selected.
0 Numbers that do not correspond to any of the existing
cameras are indicated in white.
7 Tap the [ON] or [OFF] button.
0 Tapping the button changes the button color.
0 Tap the [ON] button to set the video output of the camera
to on.
Tap the [OFF] button to set the video output of the camera
to off.
8 Tap the [ENTER] button to confirm the setting.
Memo :
0 [ALL CAMERAS] can be configured to "ON"/"OFF" only for
cameras within the same network.
0 To control the Video output of a camera that is not within the
same network, use CAMERA Group or Single.
0 When the video output of a camera is turned off, you will not
be able to control the camera.

Camera Settings Menu

Making changes to the settings menu of the
camera
1 Tap the [SETTINGS] button on the home screen of
the operation panel.
0 The SETTINGS screen appears.
0 If the home screen does not appear, select [HOME] to
display the home screen.
2 Tap the [MENU Control] button on the SETTINGS
screen.
3 Make changes to the settings menu of the camera.
0 You can use the operation panel buttons to select a
function and use the control lever and buttons to change
the setting.
Buttons
Onscreen Toggles the on-screen display between on
and off
MENU Toggles the menu display between on and
off when the on-screen display is on
Custom Picture Toggles the customized picture menu
between on and off when the on-screen
display is on
Direct Setting For selecting a Camera Direct setting when
Mode the on-screen display is on
Assign 1 to 4 Executes the function assigned to the
Assign button
ENTER Confirms an operation
Cancel Cancels an operation
4 Tap the [HOME] button.
0 After changing the settings, tap the [HOME] button to
return to the home screen.
Memo :
0 Some cameras might not allow operation of the menu.
0 For details on making changes to the settings menu of the
camera, please refer to the User Manual of the camera.
0 When removing the camera from the network, delete the
camera registration as well.
Functions
System Setup
15